Lift kit 2″ – Suzuki Vitara (1988-97)
£177.00
Description
Complete Lift Kit for Suzuki Vitara, 1st generation (1991-1997), 2 inch with rear shock spacers.
Description
The kit consists of 2 spacers for front shock absorbers with screws needed for installation, a spacer for mounting the sergeant on the rear axle with screws, an aluminum axle spacer (20mm), 2 spacers for rear shock absorbers and a set of rubber washers for springs. It’s all required for the base Suzuki Vitara lift by 2 inches (50 mm) and fits the 3- and 5-door versions, as well as the X90 model.
The kit improves entry, departure and breaking angles and allows the fitment of larger tires without impairing the vehicle’s handling in paved corners. After installing this lift, the car will be much easier to overcome major terrain obstacles.
The advantage of our kits is also the fact that if shock absorbers or springs wear out and need to be replaced, there is no need to buy much more expensive lifting elements because we always install standard shock absorbers and springs in our kits, of which there is a much larger selection and much lower prices, but above all, everyone has no problems with availability.
Installation involves fitting spring covers (lower on front axle, higher on rear axle), front shock spacers (between upper shock mount and vehicle body), sergeant spacer (between rear axle head and upper wishbone), rear driveshaft spacer and rear shock spacers (between lower shock mount and bridge).
After mounting the kit, the suspension geometry should be measured and possibly corrected. If the front wheels are tilted, adjust the tilt angle with eccentric screws, which can also be purchased from us (index: LSSM2)
Additional information
| Weight | 9 kg |
|---|
Reviews
There are no reviews yet.