Lift kit 2″ – Suzuki Grand Vitara and XL7 98-05
£157.00
Description
Complete lifting kit 2″ for Suzuki Grand Vitara (1998-2005) and Suzuki Grand Vitara XL7.
Description
Lift kit 2” for Suzuki Grand Vitara I and Suzuki Grand Vitara XL7.
The kit improves approach, departure and breaking angles, allows the fitting of larger tires (235/70) without impairing the vehicle’s handling in paved corners. After installing this lift, the car will be much easier to overcome major terrain obstacles. Installing the kit does not change the operating characteristics of the suspension, that is, there is no feeling that the suspension is harder or softer.
The advantage of our kits is also the fact that if shock absorbers or springs wear out and need to be replaced, there is no need to buy much more expensive lifting elements because we always install standard shock absorbers and springs in our kits, of which there is a much larger selection and much lower prices, but above all, everyone has no problems with availability.
The installation involves the installation of rubber spring covers (lower on the front axle, higher on the rear axle), front shock absorber spacers (between the upper shock absorber mount and the vehicle body), the installation of the front shock absorber struts (in the engine compartment) using 6 spacers and rear spacers (between the lower shock absorber mount and the bridge).
After mounting the lift, the suspension geometry should be measured and possibly corrected. In some cases, eccentric screws may be required to adjust the camber angle of the wheel (index: LSSM2)
The set fits all body and engine versions.
Additional information
| Weight | 8 kg |
|---|
Reviews
There are no reviews yet.